Boise Water & Fire Restoration

Structural Drying After Water Damage in Boise

Short answer

Structural drying is the controlled removal of moisture from framing, subfloors, drywall and other materials. We map the moisture, set equipment, and check readings until the materials return to normal, not just until they look dry.

Water or fire damage right now?

Call any time of day. If you would rather not talk yet, send a few photos and tell us what happened.

Fire, gas smell, or a risk of electric shock: leave the building and call 911 first.

Why drying is its own job

Removing standing water is only the first step. Water soaks into drywall, wood framing, subfloors, insulation, concrete and plaster. Those materials hold moisture long after the puddles are gone. If they stay wet, they warp, weaken and can grow mold. Structural drying is the work of getting that moisture out in a controlled way.

How we dry a structure

1. Find the wet areas. We use a moisture meter to measure materials, and thermal imaging to spot cool, wet areas behind surfaces. We also check the air in the house for temperature and humidity.

2. Set a plan. We decide where to put air movers and dehumidifiers, which areas to treat separately, and whether any areas need special drying systems.

3. Set the equipment.

  • Air movers push air across wet surfaces so moisture leaves the material.
  • Dehumidifiers pull moisture out of the air. Without them, the air fills up and drying stops.
  • Injection and cavity drying can dry inside wall bottoms and under floors without opening large areas.

4. Monitor. We come back and take readings at set intervals. We move or add equipment if an area is lagging.

5. Confirm. Equipment comes out when materials read dry compared with unaffected parts of your home. Surface feel is not enough.

Boise and drying

Boise's air is dry for much of the year. The average January low is about 25 degrees, and the winter air is cold and holds little moisture. That can help, but it does not mean opening windows is a drying plan. A closed, controlled space with a dehumidifier dries faster and more predictably than open air. In a cold house, dehumidifiers also work less well, so we may ask to keep the heat on.

In spring, when irrigation deliveries start in April and runoff is high, basements and crawl spaces can start out damp. That changes the drying plan.

What can and cannot be dried

Materials differ.

Usually dry well: wood framing, concrete, many subfloors, tile, solid wood flooring in some cases.

Often do not dry well: carpet pad, insulation that stays packed against a wet surface, particleboard, and drywall that has been wet for a long time or with dirty water.

Depends: hardwood floors, plaster and lath in older homes, laminate, cabinets.

Plaster and lath walls are common in older Boise homes, such as the North End homes built in the early 1900s. They dry differently from modern drywall, and we adjust.

When a material cannot be dried, it has to come out. We tell you what the readings show, and a repair contractor handles the removal and the rebuilding. Please do not remove materials yourself.

What to expect in your home

  • Noise. Equipment runs around the clock for days.
  • Heat. Dehumidifiers add warmth to rooms.
  • Electricity. The equipment uses power. Your insurer may cover this as part of the loss, so ask.
  • Furniture. We may lift or move items to dry floors and walls.
  • Visits. We come back on a schedule to read moisture and adjust.

Please leave doors open to treated rooms and keep pets and children away from equipment. Do not cover or move the machines.

Why not just use fans

Fans alone move wet air from one place to another. Without dehumidification, the moisture ends up in other materials or on cold surfaces. Rented box fans and a household dehumidifier cannot match the airflow and capacity needed for most losses.

Why speed matters

Water that sits in materials for days starts to cause lasting damage. Wood swells and warps. Drywall softens. Odors form. Mold can begin to grow within days of a loss in a damp, warm space. Mold is not our work, but drying quickly gives it less chance to start.

Hidden moisture

Walls can look dry and still hold water at the bottom plate. Under floors, a wet subfloor can feel solid. Behind cabinets and tub surrounds, water can sit for weeks. That is why we measure instead of guessing. If you had a leak weeks ago and the room still smells damp, call, and we can check with a meter.

When we are done

You will get final readings and photos showing materials back to normal. Keep them with your insurance file. Any materials that could not be dried are noted, so the repair contractor knows where to start.

Documentation

We keep daily moisture logs and photos. Those records show your insurer what was wet, how it was dried, and when drying was complete. See filing a water damage claim.

Equipment and your power bill

Drying equipment runs for days and uses electricity. A typical setup uses several machines at once, and your power use will rise while it runs. Ask your insurer whether the increase is part of the loss, and keep a copy of the bill for the same month in the prior year.

What it costs

Drying costs depend on the area wet and the water type. Published sources describe per-square-foot ranges. See water damage cleanup cost. Equipment use is usually a significant part of the total.

Start with extraction

Drying works best after the bulk water is gone. If you have standing water, see emergency water removal. If you are not sure whether there is still moisture in your home after a leak, send photos and get help now or call. We can check with a meter.

Questions

How do I know if my walls are still wet?

You cannot tell by looking. Materials can feel dry on the surface and hold moisture inside. We use moisture meters and thermal imaging to check.

How long does structural drying take?

It depends on how much water there was, what it soaked into, and the conditions in the house. Many jobs take a few days. Thick or dense materials take longer. We check readings on each visit.

Why are the machines so loud and why so many?

Drying needs air movement and dehumidification at the same time, matched to the wet areas. The number of machines comes from the size and wetness of the job, not a fixed formula.

Can I turn off the equipment at night?

Please do not. Stopping the equipment lets moisture settle back into materials. If the noise is a problem, call and we will talk about it.

Last updated 2026-11-16.